ANTI-SWAY CONTROLLER ANGLE SENSOR WIRESS PROFIBUS DEVICE

ANGLE SENSOR

  HOME > PRODUCTS > ANGLE SENSOR

Preface
The N-1000 is a sensor that tracks the reflector at high speed and measures the degree to which it deviates from the centre point of the reflector and the torsion with angle values of the X, Y, and Skew. A special filter is fitted on the front of AN-1000 and an infrared beam injection minimizes interference and recognition errors to external light sources. The angle sensor is used for Anti-Sway control by tracking the swaying state of the hoist and lifter during automatic control of the crane. Measured angle data is sent to RS-485/422 Serial Communication You can also set up angle zeroing, initializing, and rebooting functions by communication, easily from outside.
Hardware

ㆍAN-1000(Sensor)

Dimensions W x H x D (mm) 138 x 404 x 132
Weight 4.7 Kg (Includes protective housing)
Operating temperature -20oC ... +60oC (without condensation)
IP protection class IP66
Load voltage L+ L+24V DC (18 V ... 30 VDC)
Current consumption 0.6A ... 3.5A
Power dissipation 7.2W(typ.) 42W(max.)
Serial Interfaces (protocols) 1 x RS-422/485
(2.0mm pitch, right angle type)
Ethernet Controller 1 x 10/100 Mbps
Measured Value X-axis +/- 10o   Y-axis +/- 7.5o
Skew-axis 0~360o
IAngle accuracy max +/- 0.01o at distance 1.5 ~ 25 m
Option [ distance 35 m ]

ㆍREFLECTOR

ere-AN-1000-FR
Dimensions W x H x D (mm) 175X175X13
Feature No Power, reflector Sheet
ere AN-RFIR-40
Load voltage 110 ~ 220 VAC
Operating
temperature range
-10oC ... +60oC (without condensation)
Feature 3Point IR beam (850 nm)